A smart toilet can turn a basic bathroom into a more comfortable daily routine, while a macerating system can make a basement bathroom possible where gravity drainage is difficult. The right choice depends on your space: the Glendan model combines washing, drying, heated seating, and automatic flushing, whereas five Simple Project systems use a pump to move waste toward the main drain.
Your Options, Compared
Glendan Smart Toilet with Built-in Bidet, Dryer, and Foot Sensor
Simple Project 750W Macerating Toilet
Simple Project 600W Macerating Toilet
Simple Project 500W Macerating Toilet
Simple Project 1000W Macerating Toilet
Simple Project 600W Basement Toilet
More Details On Our Top Picks
The Glendan model brings a bidet, dryer, heated seat, and automatic flushing into one fixture. A bidet uses a water spray for personal washing, while the added dryer and four heat levels provide a more comfortable routine in cool bathrooms. This is the most feature-focused option here for households with an existing bathroom outlet.
Unlike the macerating systems that solve waste routing, this unit concentrates on daily comfort and touch-free operation. You can select warm water from 93°F to 104°F, five washing modes, and automatic flushing after leaving the seat. In our view, the controls may take a little getting used to, but busy family bathrooms gain useful touch-free functions.
The Helpful Details
- Five washing modes include a fine mist and oscillating spray.
- Four seat temperatures and four dryer temperatures suit changing seasons.
- Leaving the seat triggers automatic flushing without operating a handle.
- A foot sensor provides a second hands-free flushing method.
- Dual-flush choices and bowl pre-wetting support more considered water use.
Trade Offs
- Your bathroom needs an accessible electrical outlet and compatible floor support.
- The remote, side knob, sensor, and child mode create a learning curve for a simple daily routine.
Feature Snapshot
Who It Suits Best
You benefit most from this model if accessible electricity and floor-mounted installation are available in a frequently used family bathroom.
Where Another Pick Suits Better
The Simple Project 750W Macerating Toilet suits households adding a basement bathroom where gravity drainage cannot reach the main sewer line.
A macerating toilet grinds waste with a pump and moves it into a drain line, making it useful where the sewer sits above the bathroom. The Simple Project 750W Macerating Toilet combines a 750W motor with stainless steel cutting blades. Its stated reach of 360 feet horizontally and 36 feet vertically gives you more routing flexibility in a basement or attic.
Four water inlets let the system accept waste from several connected fixtures, including a toilet, shower, or basin. That makes this a sensible center point for a compact lower-level bathroom suite. Installation still requires careful measurement and proper drainage access, so the extra reach matters only when your pipe layout can use it.
Real-World Strengths
- The 750W motor provides a strong starting point for demanding waste routing.
- Stainless steel blades break down waste before pumping.
- Four inlets support a multi-fixture bathroom arrangement.
- The extended horizontal reach suits drain lines located far from the room.
Practical Considerations
- Confirm that the room has suitable access to the outgoing drain line.
- Four inlets demand correct pipe placement and watertight connections.
- The two-piece configuration needs adequate space around the tank and bowl.
Quick Facts
Built With In Mind
This model fits DIY renovators adding a multi-fixture bathroom to a basement with a distant or elevated sewer connection.
Consider Something Else When
The Glendan Smart Toilet with Built-in Bidet, Dryer, and Foot Sensor fits an existing bathroom focused on washing comfort rather than basement waste routing.
The 600W Simple Project macerating toilet shifts attention toward quieter operation in a below-grade bathroom. Like the 750W model, it uses a pump to move waste toward a suitable drain, but the lower motor rating and quieter positioning make it a different fit for particular room layouts. A home office or guest suite nearby could make reduced mechanical noise especially useful.
Its four water inlets support connections from multiple fixtures, so you can build a complete bathroom around one waste-management system. The two-piece layout also separates the tank from the bowl. You will still need a professional or experienced installer to assess pipe slope, vent requirements, and the location of the main drain.
Notable Upsides
- The design emphasizes quieter operation for sensitive spaces.
- Four inlets accommodate several connected fixtures.
- The 600W pump supports standard macerating toilet applications.
Points To Note
- Measure the installation area carefully because the system uses a two-piece layout.
The Right Fit
You benefit most from this option when creating a lower-floor bathroom near living spaces and keeping mechanical noise in mind.
A Better Fit Elsewhere
The Simple Project 750W Macerating Toilet offers greater stated pumping reach for layouts with a distant or elevated drain.
The Simple Project 500W Macerating Toilet is built around a 1.6-gallon-per-flush design, offering a measured alternative to the higher-powered systems in this roundup. The 500W macerator handles waste from a rear outlet, while four water inlets let you connect a sink, shower, or other bathroom fixture. That combination works neatly for a self-contained basement bath.
Compared with the 600W model, this system places more emphasis on flushing volume than motor output. The included extension pipe adds routing flexibility, and the updated design is positioned for quieter operation. The trade-off is straightforward: a demanding waste route may call for the greater pumping capacity offered by the 750W or 1000W models.
Strong Points
- The 1.6-gallon flush offers a lower-volume flushing configuration.
- Four inlets serve a complete basement bathroom arrangement.
- An extension pipe adds routing options between fixtures and the drain.
- The quieter design suits lower floors near occupied rooms.
Some Limits To Know
- Its 500W rating sits below the 600W and 750W alternatives.
- The extension pipe and multiple inlets require careful space planning.
Core Details
Made For
This model suits renovators creating a compact basement bath with several fixtures and a manageable drain route.
Not Your Match When
The Simple Project 1000W Macerating Toilet suits installations requiring greater pump power and a stated pumping reach of up to 40 feet.
The Simple Project 1000W Macerating Toilet brings the highest motor rating in this group, giving you more pumping power for a challenging waste route. Its listed reach extends up to 40 feet, while the included extension pipe helps bridge the distance from the bathroom fixture to the drain. That makes it a strong candidate for a finished basement where the main sewer connection is not directly below the room.
Four water inlets support a shared system for a toilet, shower, sink, or similar fixture. The rear-outlet layout focuses on moving processed waste away from the bowl. You gain useful routing capacity, but higher power does not remove the need for a sound drain design, proper venting, and accurate measurements.
The Value In It
- The 1000W motor provides the highest stated power here.
- Up to 40 feet of reach supports longer waste routes.
- The extension pipe helps connect the fixture to a remote drain.
- Four inlets allow several fixtures to share the system.
Where It May Fall Short
- More pump power is unnecessary for a short, straightforward drain route.
- The extension pipe adds another connection to measure and install.
- Basement plumbing still requires suitable slope and venting.
Whose Shelf It Belongs On
This system suits experienced renovators handling a long drain run in a basement, garage, or other below-grade conversion.
Another Choice May Suit
The Simple Project 500W Macerating Toilet fits a simpler basement layout centered on a 1.6-gallon flush and several connected fixtures.
The Simple Project 600W Basement Toilet pairs a one-piece body with a 600W macerating pump for below-grade bathrooms. The stated pumping reach covers up to 295 feet horizontally and 30 feet vertically, giving you room to work around an awkward sewer position. Unlike the longer-reach models, this choice puts particular emphasis on a compact fixture configuration and straightforward basement use.
Three water inlets let the system accept waste from connected fixtures such as a sink or shower. That makes it useful for a multipurpose lower-level bathroom rather than a standalone toilet. You should compare the one-piece footprint with your available floor space and confirm the outgoing pipe location before ordering.
What Earns Its Place
- The one-piece body suits straightforward basement layouts.
- Three inlets support a compact group of bathroom fixtures.
- The 600W pump provides useful routing power for lower floors.
Details To Watch
- Three inlets offer fewer connection points than the four-inlet alternatives.
- The long horizontal reach still depends on correct pipe slope and installation.
Key Product Details
Who Will Love This
You benefit most from this system when a compact one-piece toilet and three-fixture connection layout suit your basement plan.
Look Elsewhere When
The Simple Project 750W Macerating Toilet fits projects requiring four inlets and a greater stated horizontal reach of 360 feet.
What Matters Before You Choose Your Bathroom System
Start with the plumbing problem
A macerating system solves a specific installation challenge: moving waste uphill or beyond a normal gravity drain route. Measure the horizontal and vertical distance to the main sewer connection before considering motor power. A high-powered pump cannot compensate for a poorly planned pipe run.
Decide which daily features matter
The Glendan option changes the toilet experience with a built-in bidet, warm-water washing, heated seating, drying, and automatic flushing. Those features require a nearby electrical outlet. A basement macerating system focuses on waste routing instead, so your decision comes down to the physical problem in your bathroom.
Match the pump to the route
The five macerating systems range from 500W to 1000W, with stated reaches varying by model. The 500W system includes a 1.6-gallon flush design, while the 1000W model provides the greatest listed reach. Choose based on the pipe layout rather than assuming the highest rating is necessary.
Count every connected fixture
Three- and four-inlet systems can support combinations of a toilet, sink, shower, or laundry equipment. Count the fixtures and map their drain locations before ordering. A one-piece body may simplify the footprint, while a two-piece configuration gives you separate placement options for the tank and bowl.
What the Higher Level Adds
Mistakes Worth Dodging
Ignoring the electrical requirement can derail a bidet installation before work begins. Measuring only the bowl leaves out pump housing, inlet pipes, and the space needed to service connections, so sketch the complete footprint and access points.
What Separates Premium From Basic
Extra pump power matters for long or difficult waste routes, while quieter operation matters near bedrooms and living areas. The lower-level options can be perfectly sensible for short runs, but their fittings, inlet count, and stated reach still need to match your bathroom. Check the manufacturer’s installation guidance before the project reaches the pipe-fitting stage.
Frequently Asked Questions
What is a high tech toilet?
A high tech toilet combines conventional flushing with electronic features such as bidet washing, heated seats, automatic flushing, or a macerating pump. Your choice depends on whether you want added comfort or a solution for a challenging drain layout.
Are built-in bidet toilets comfortable?
Built-in bidets offer adjustable warm water, multiple washing modes, drying, and heated seats in the Glendan model. Comfort varies by preferences, so you can compare the spray and heat settings before settling on a routine.
Do macerating toilets work in basements?
Macerating toilets pump waste toward a suitable drain when gravity flow cannot handle the installation. Basement projects require careful attention to pipe slope, venting, inlet placement, and the distance to the main sewer connection.
Which macerator motor power do you need?
Motor power should reflect the length and complexity of the waste route rather than a single number. The 500W, 600W, 750W, and 1000W options serve different layouts, with the highest rating offering the greatest stated reach among these systems.
Do smart toilets need an electrical outlet?
Electrical-powered smart toilet functions require an accessible outlet. The Glendan model also calls for suitable floor-mounted support, so electrical access and installation conditions should be checked before purchasing.
Wrap Up
Your decision comes down to the bathroom itself. Choose the Glendan toilet for integrated washing, drying, heating, and automatic flushing, with an accessible outlet in place. For a basement or other difficult drainage situation, compare the Simple Project systems by fixture count, flush volume, pump power, and stated reach. Either way, the plumbing layout should guide the final choice.