A round toilet can make a compact bathroom feel less crowded, but the bowl shape alone doesn’t settle the decision. You also need to account for seat height, floor space, rough-in measurements, and the waste line, especially in a basement or other room where conventional gravity plumbing is difficult to reach. These six options cover two distinct needs: a raised-height fixture for easier access and macerating systems for flexible below-grade installation.
A Fast Comparison Of The Options
Vomlor 19-Inch Compact Tall Toilet
Simple Project 750W PRO Macerating Toilet System
Simple Project 600W Macerating Toilet System
Simple Project 500W Macerating Toilet System
Simple Project 1000W Macerating Toilet System
Simple Project 600W Macerating Toilet System
A Closer Look At Each Pick
A raised toilet changes the feel of an accessible bathroom more than most decorative details. The Vomlor 19-Inch Compact Tall Toilet places the seat 20 inches above the floor, giving you a more upright sitting position and reducing the depth of movement needed to sit or stand.
Its compact 15.75-inch width suits small bathrooms where floor space matters, while the 1.28-gallon single flush limits water consumption. Unlike the macerating systems later in the list, this two-piece fixture uses a conventional floor connection and is intended for users who prioritize accessibility over installation flexibility.
Reasons It Performs
- The 20-inch seat height supports easier transfers for taller users, seniors, and anyone with limited lower-body mobility.
- The compact width helps preserve walking room in a small bathroom.
- A single 1.28-gallon flush combines water-conscious operation with a fully glazed trapway.
- Both the seat and lid use damped slow-close mechanisms for quieter nighttime use.
- The fired porcelain body has a smooth, stain-resistant glaze for routine cleaning.
Practical Considerations
- You need a 12-inch rough-in, and two people are recommended for installation because of the porcelain body.
Core Details
Who It Suits Best
You benefit most from this model when you need a taller seat in a compact bathroom with a standard 12-inch rough-in.
A Better Fit Elsewhere
Simple Project 750W PRO Macerating Toilet System suits you better when the bathroom sits below the main sewer line.
Installing a toilet below the sewer line calls for a different approach than a standard gravity-fed fixture. The Simple Project 750W PRO Macerating Toilet System breaks waste down with stainless-steel blades, then uses a 750-watt pump to move it toward the receiving drain.
That makes it a practical choice for a basement bathroom, attic washroom, or addition where the waste pipe must travel beyond the reach of a normal floor drain. Four water inlets give you more ways to organize connected fixtures, although every added inlet requires careful pipe routing.
Key Advantages
- The stated pumping range reaches 360 feet horizontally and 36 feet vertically.
- The 750-watt motor gives you a higher output figure than the 600-watt alternatives.
- Stainless-steel cutting blades break waste down before it enters the discharge line.
- Four inlet ports support a more consolidated basement plumbing layout.
- Pump-assisted routing offers flexibility where gravity drainage would be difficult.
Trade Offs
- The published horizontal and vertical distances represent maximum routing figures, so bends and the installed layout still need consideration.
- Four inlet connections make this system more involved than the three-inlet alternative.
- A macerating system requires a compatible discharge arrangement rather than the conventional waste setup used by the Vomlor toilet.
Quick Facts
Built With In Mind
This system fits you best when a basement contains several fixtures and the waste line requires a long pump-assisted route.
Where A Sibling Pick Shines
Simple Project 1000W Macerating Toilet System offers a stronger motor specification for layouts that prioritize greater pumping output.
A basement bath can become disruptive when the toilet and nearby rooms sit close together. The Simple Project 600W Macerating Toilet System takes a quieter-focused approach, combining a 600-watt pump with a rear outlet and four water inlets.
You can connect several bathroom fixtures to the system, which suits a finished basement with a sink, shower, and toilet sharing one waste route. Compared with the 750W PRO model, this option uses a lower motor rating but keeps the same four-inlet configuration.
Useful Highlights
- The silent-operation emphasis suits basement rooms where pump noise could be distracting.
- A 600-watt motor provides pump-assisted waste transport for below-grade bathrooms.
- Four water inlets let you consolidate several connected fixtures.
- The rear outlet supports installation layouts that require the waste line to leave behind the toilet.
Points To Note
- The 600-watt motor is a step down from the 750W PRO system’s stated output.
- You need to plan each of the four inlet connections rather than treating the toilet as a single-fixture unit.
- The quieter design is the main draw here, since no published pumping-distance figures are provided for this model.
Made For
This model suits you when quiet operation and a four-fixture connection layout matter more than having the highest motor rating.
Reach For A Different Pick When
Simple Project 750W PRO Macerating Toilet System fits you better when you have a long, complex discharge route that requires a larger stated pump output.
Not every basement layout needs the largest pump on the list. The Simple Project 500W Macerating Toilet System combines a 500-watt macerator, four water inlets, and an extension pipe, giving you several installation components in one package.
Its 1.6-gallon flush and rear-outlet design suit an upflush-style arrangement. The included extension pipe helps create distance between the toilet and discharge connection, while the four inlets offer a straightforward way to gather waste from multiple bathroom fixtures.
The Helpful Details
- Four inlets support a shared basement system with several connected fixtures.
- The extension pipe adds routing flexibility between the toilet and drain.
- A 1.6-gallon flush provides a defined water-use figure for planning.
- The updated silent-operation focus keeps the system appropriate for occupied rooms.
Possible Compromises
- The 500-watt motor has the lowest stated output among the macerating options here.
- You still need to verify that the extension route and four inlet connections suit the available plumbing space.
Technical Highlights
Right Fit For
You get the most useful configuration when your basement bathroom includes several fixtures but needs a moderately sized macerator and extension pipe.
Another Choice May Suit
Simple Project 600W Macerating Toilet System suits you better when a higher motor rating takes priority over the included extension pipe.
Long waste runs and higher-rise discharge routes call for more pump capacity than a modest basement installation may need. The Simple Project 1000W Macerating Toilet System centers on a 1000-watt motor, the highest output figure among the six options.
An extension pipe and four water inlets make it suitable for a room that combines the toilet with additional fixtures. Its stated pumping reach extends up to 40 feet, giving you another reason to compare the route carefully with simpler systems.
The Case For It
- The 1000-watt motor provides the strongest stated power figure in this group.
- A pumping distance of up to 40 feet supports longer discharge routes.
- The included extension pipe adds useful separation between fixture and drain.
- Four water inlets let several fixtures share the macerating system.
- The quiet-operation focus suits a basement used as a living space.
Factors To Consider
- You need a route that justifies the higher-output pump rather than a short basement connection.
- Four inlets and an extension pipe require enough wall or floor space for the complete layout.
The Right Fit
This model fits you best when the waste line is distant or elevated and the basement contains several connected fixtures.
Swap It Out When
Simple Project 500W Macerating Toilet System offers a more modest motor and a similar four-inlet arrangement for layouts that don’t need the added output.
Three connected fixtures can still create a substantial waste load in a basement. The Simple Project 600W Macerating Toilet System provides a 600-watt pump, three water inlets, and stated routing figures of up to 295 feet horizontally and 30 feet vertically.
Unlike the four-inlet systems, this one uses a one-piece configuration and gives you a slightly simpler connection plan. It appears well matched to a bathroom with a toilet, sink, and shower, particularly where conventional drainage would need a steep or distant connection.
What Helps Most
- The 295-foot horizontal reach gives you considerable routing flexibility.
- Vertical pumping extends up to 30 feet for raised discharge arrangements.
- Three inlets suit a toilet and two additional fixtures without adding a fourth connection.
- The one-piece body keeps the listed product configuration compact.
- A 600-watt motor balances pumping capability with a moderate system footprint.
Details To Watch
- Three inlets are less flexible than the four-inlet systems for adding another fixture later.
- You need to confirm the available floor space and discharge route before choosing this one-piece configuration.
Feature Snapshot
Who Should Grab It
This system suits you when you have three fixtures to connect and want substantial routing reach without carrying four inlet lines.
Look Elsewhere When
Simple Project 750W PRO Macerating Toilet System suits you better when a fourth fixture or a greater horizontal reach is needed.
What Matters Before You Order A Round Toilet
Measure The Space First
A compact bowl can help in a small bathroom, but the listed width and projection still control whether the fixture feels crowded. Measure from the finished wall to the flange or waste outlet, leave room for the seat and lid, and check the door swing before you choose.
Set the Right Height
A 20-inch seat offers a noticeably more upright position than a standard-height fixture. That extra height helps many users sit and stand with less strain, though it may feel too tall for shorter household members.
Understand The Waste Route
A macerating toilet uses a pump and cutting mechanism to move waste through a pipe that cannot rely entirely on gravity. Compare the stated horizontal and vertical reach with your actual route, including turns, connections, and the receiving drain.
Key Details That Shape Your Installation
Common Shopping Slip Ups
Measuring only the bowl footprint can leave you with a poor fit, so check the complete dimensions and rough-in before ordering. In a basement, assuming that any pump can handle the same pipe run also creates problems, especially when several fixtures share the route.
What Separates Premium From Basic
The larger macerators differ mainly through motor power, routing reach, inlet capacity, and included pipe components. Paying more for added output makes sense for a distant or elevated waste line; a shorter connection may need less equipment.
Frequently Asked Questions
Are Round Toilets Easier To Install Than Standard Toilets?
Round toilets still depend on the floor connection, so bowl shape alone doesn’t make installation easier. You need to match the rough-in and confirm that the surrounding bathroom space works.
Which Toilet Is Best For A Basement Bathroom?
The Simple Project 750W PRO Macerating Toilet System offers a strong balance of pump output, four inlets, and extended routing figures. Your basement layout determines whether those capabilities are necessary.
Do Any Of These Toilets Have A Higher Seat?
The Vomlor 19-Inch Compact Tall Toilet has a 20-inch seat height and a 19-inch bowl height. That profile supports more upright transfers than a standard-height fixture.
What Does A Macerating Toilet System Do?
A macerating toilet grinds waste and pumps it through the waste line using a motorized cutting and pumping mechanism. This makes it useful where gravity-fed drainage is impractical.
Can You Connect A Shower And Sink To A Macerating Toilet?
Several models provide multiple water inlets for connecting additional bathroom fixtures. Check the inlet count, pipe route, and receiving waste connection before planning the layout.
Final Verdict
Your best fit depends on the plumbing rather than the bowl label alone. The Vomlor model serves a compact bathroom that needs a taller seat, while the Simple Project systems cover below-grade rooms where pump-assisted waste routing is the deciding factor. Measure first, match the system to your connection plan, and choose based on the space you actually have.