A bathroom refresh can hinge on two very different trim decisions: the hardware controlling your shower and the molding where the floor meets the wall. You need a pressure-balancing valve or its finished trim for temperature control, while vinyl baseboard can cover a vulnerable floor edge without a separate paint-and-caulk routine.
Your installation also determines the practical choice. A complete shower valve, a trim-only kit, and peel-and-stick baseboard solve different parts of the same room, so matching the component to the project matters more than comparing appearances alone.
Your Options, Compared
KOHLER 11748-KS-NA Rite-Temp Valve with Screwdriver Stops
Kohler TS35320-4-CP Elate Chrome Trim
KOHLER 11748-K-NA Rite-Temp Pressure-Balancing Valve
Kikerike 3 Inch x 20 Feet White Peel-and-Stick PVC Baseboard Trim
Kikerike 4 Inch x 20 Feet White Peel-and-Stick PVC Baseboard Trim
Kikerike 4 Inch x 40 Feet White Peel-and-Stick PVC Baseboard Trim
The Details Behind The Selections
The KOHLER 11748-KS-NA handles the concealed side of a shower installation, where a half-inch pressure-balancing valve moderates temperature changes as water pressure varies. Unlike the polished Elate component, this is the working valve body rather than the visible control assembly.
The one-piece diaphragm cartridge gives the valve a serviceable internal design, while the integral push-button diverter can direct water between a showerhead and handshower. For a remodeler or homeowner replacing compatible Kohler shower hardware, the screwdriver stops add a useful installation detail.
A Few Strong Suits
- Pressure-balancing control helps limit abrupt temperature shifts during ordinary use.
- The one-piece diaphragm cartridge is designed for straightforward servicing.
- An integrated diverter supports showerhead and handshower configurations.
- A high-temperature limit setting adds another layer of control.
- Brass construction gives the concealed valve body a substantial material core.
Practical Considerations
- This is a rough-in valve, so compatible trim and a showerhead or handshower remain separate parts of the project.
- Its half-inch designation and Kohler configuration need to align with the existing rough-in and finish hardware.
Technical Sheet
Built With In Mind
This valve suits homeowners and renovators handling a compatible Kohler shower system with a showerhead and handshower.
Another Choice May Suit
The KOHLER 11748-K-NA Rite-Temp Pressure-Balancing Valve better fits installations that do not need screwdriver stops.
Polished chrome and a geometric profile give the Kohler TS35320-4-CP a clean focal point on a bathroom wall. It is the visible shower control, not the internal valve, so its appeal comes from the single lever, faceplate, and coordinated Elate styling.
For a coordinated bathroom, the trim can align with other pieces from the Elate collection. You still need a compatible Rite-Temp valve and a showerhead, so plan the concealed components before treating this as a complete shower package.
Where It Delivers
- One lever handles both activation and temperature adjustment.
- The polished chrome finish gives the wall-mounted faceplate a bright, reflective appearance.
- The metal lever provides a clear grasping point for everyday shower operation.
The Fine Print
- The valve and showerhead are sold separately, so the visible kit is not a complete installation.
- Its Elate styling matters most in a bathroom that uses clean lines and reflective finishes.
- Compatibility with the selected Rite-Temp valve needs to be confirmed before ordering.
Feature Snapshot
The Right Fit
This trim suits someone building a coordinated chrome shower wall and already handling the compatible valve and showerhead separately.
A Better Fit Elsewhere
The KOHLER 11748-KS-NA Rite-Temp Valve with Screwdriver Stops better fits a shower project focused on the concealed pressure-balancing and diverter mechanism.
The KOHLER 11748-K-NA is a half-inch pressure-balancing valve with a push-button diverter for showerhead and handshower use. It handles the concealed water-control side of the installation, so the visible trim and spray fixture remain separate decisions.
Compared with the KOHLER 11748-KS-NA Rite-Temp Valve with Screwdriver Stops, this model offers the same core valve format without the listed screwdriver-stop configuration. That distinction can simplify parts selection for a compatible installation, depending on what is already behind the wall.
Bright Spots
- The push-button diverter supports switching between a showerhead and handshower.
- Its pressure-balancing design targets steadier temperature control as water pressure changes.
Less Ideal Details
- This valve is not a visible trim kit, so you need compatible finish hardware and a shower outlet to complete the shower.
Who Should Grab It
This valve suits a homeowner or renovator replacing compatible half-inch Kohler shower hardware without a need for screwdriver stops.
Look Elsewhere When
The KOHLER 11748-KS-NA Rite-Temp Valve with Screwdriver Stops better fits a rough-in that requires that specific stop configuration.
A three-inch profile suits a short bathroom wall or a tighter room where a taller baseboard could feel visually heavy. The Kikerike 3 Inch x 20 Feet trim combines a 20-foot length with self-adhesive placement, making it more approachable for a focused weekend project.
Its cove molding has a curved transition rather than a simple square edge, which gives the floor line a finished profile. Flexible PVC also makes the material practical around bathroom moisture, though your preferred wall color and trim style should guide the final choice.
Where It Helps
- The three-inch size works well where visual bulk needs to be restrained.
- Self-adhesive placement reduces the number of separate installation steps.
- Flexible PVC offers moisture resistance and straightforward cleaning.
- White finish blends with common bathroom walls and light flooring.
Possible Compromises
- The 20-foot length suits short runs better than a wall extending around several corners.
- Plan the placement before peeling the backing so the length and corners remain manageable.
Key Details
Whose Shelf It Belongs On
This baseboard suits apartment residents and homeowners finishing a compact bathroom with a clean, white floor edge.
Reach For A Different Pick When
The Kikerike 4 Inch x 40 Feet White Peel-and-Stick PVC Baseboard Trim better fits a larger room with longer wall runs.
The Kikerike 4 Inch x 20 Feet option gives you a taller cove profile without moving up to the 40-foot version. That middle ground suits a medium bathroom where four inches provides more visual coverage while the shorter roll remains easier to handle than a longer piece.
Compared with the Kikerike 3 Inch x 20 Feet trim, the profile covers more of the lower wall. Compared with the Kikerike 4 Inch x 40 Feet trim, it avoids carrying twice the length for a room with only a limited wall run.
Everyday Wins
- The four-inch profile provides more coverage than the three-inch option.
- The 20-foot length remains practical for a single wall or a pair of moderate runs.
- Self-adhesive installation suits a simple bathroom refresh.
- White PVC creates a clean, low-maintenance floor edge.
Details To Watch
- The four-inch profile may appear substantial in a very small room.
- A 20-foot roll can be less convenient for walls that require several connected lengths.
- Measure the floor edge and plan corners before applying the adhesive backing.
Made For
This baseboard suits homeowners covering a medium wall run who want a four-inch profile without handling a 40-foot length.
Where A Sibling Pick Shines
The Kikerike 3 Inch x 20 Feet White Peel-and-Stick PVC Baseboard Trim better fits a compact room that needs a lighter profile.
The Kikerike 4 Inch x 40 Feet trim is built for bathroom walls that need more continuous coverage. It keeps the same four-inch cove profile as the 20-foot version but doubles the length, which can reduce the number of separate pieces across a larger room.
Flexible PVC suits the damp setting and remains easy to wipe clean, while the self-adhesive format supports a straightforward installation. In a larger space, the longer length may also create a more continuous visual line along the floor.
Useful Touches
- The 40-foot length works well for larger rooms and multiple wall sections.
- The four-inch cove profile provides substantial floor-edge coverage.
- Self-adhesive placement keeps the installation focused on positioning and pressing.
- Moisture-resistant PVC suits bathroom floors and routine wiping.
Small Limitations
- A longer roll needs more careful handling around corners and tight doorways.
- Measure your coverage before opening the package so the length matches the planned runs.
At A Glance
Best Suited To
This baseboard suits homeowners finishing a larger bathroom with several connected wall runs and a four-inch white trim profile.
Swap It Out When
The Kikerike 4 Inch x 20 Feet White Peel-and-Stick PVC Baseboard Trim better fits a project needing the same profile with a shorter length.
What Matters Before You Buy Bathroom Trim
Start With the Installation
Shower trim and baseboard trim occupy different parts of a bathroom renovation. A pressure-balancing valve controls water delivery behind the wall, while a valve trim provides the visible handle and faceplate. Vinyl baseboard serves an entirely different purpose by covering the junction between the wall and floor.
Match Size to the Room
A three-inch baseboard creates a lighter visual profile, while four inches provides more wall coverage. You also need to account for corners, doorways, and cabinet edges before choosing between a 20-foot or 40-foot length.
Check the Visible Finish
Polished chrome works well with bright, coordinated bathroom fittings, while white PVC baseboard blends more readily with light walls and floors. Check the surrounding fixtures and surfaces so the finish looks intentional rather than simply available.
Two Details That Change the Decision
Common Shopping Slip Ups
The easiest mistake is treating a valve, a trim kit, and a showerhead as one interchangeable product. Another is selecting baseboard by color alone, then discovering that the profile is too tall or the length creates an awkward extra piece.
What Separates Premium From Basic
A premium shower finish changes visible hardware and coordinated design, while added material length changes installation logistics rather than appearance. The better fit comes down to matching hardware compatibility, wall coverage, and room proportions.
Frequently Asked Questions
What is the difference between valve trim and a pressure-balancing valve?
Valve trim is the visible handle and faceplate, while a pressure-balancing valve controls water pressure and temperature inside the wall. Most bathroom projects need compatible versions of both.
Which Kohler option includes screwdriver stops?
The KOHLER 11748-KS-NA Rite-Temp Valve with Screwdriver Stops includes that feature. The KOHLER 11748-K-NA model has a different listed stop configuration.
Is the Kohler Elate trim a complete shower system?
No, the Kohler TS35320-4-CP Elate Chrome Trim is a trim component. You also need a compatible Rite-Temp valve and a showerhead.
Should a bathroom use 3-inch or 4-inch baseboard?
Choose 3 inches for a lighter profile in a compact room, or 4 inches for greater wall coverage in a larger space. Measure the available floor edge before ordering.
Are the Kikerike baseboards suitable for damp rooms?
The flexible PVC construction provides moisture resistance for bathroom use. You still need a clean, secure mounting surface for the adhesive backing.
Final Verdict
The right bathroom trim depends on the job: concealed shower control, visible valve hardware, or floor-edge coverage. Match the Kohler components to your existing system, then choose baseboard according to wall length, room size, and the profile you want to see every day. A careful measurement now prevents a mismatched part from interrupting the project later.